KHATANA NEWS

Online Application Process

CLICK HERE FOR MORE RESULTS JOB

1. How do I apply ONLINE?

Go to the link “How to apply?” and then choose “online application process”. Register yourself by entering your name, date of birth, password and email id. You can then fill in your ONLINE application form, proceed to make the payment of application fee using Payment Gateway or Challan Payment options.

2. Should I attest the photograph for ONLINE application form?

Do not attest the photograph for the ONLINE application form.

3. Why should I choose two examination cities?

Generally, you will be allotted a centre in the examination city of your first choice. Only in cases where it becomes difficult to accommodate you in the examination city of your first choice, your second choice will be considered.

4. You are asking only the SC/ST/PD candidates to enclose the category certificate. What about the OBC (non-creamy layer) candidates? Do they have to enclose the category certificate too?

OBC (non-creamy layer) candidates do not have to enclose the category certificate since their application fee is same as that of the general category candidates. However, in the ONLINE application, you can indicate the category to which you belong to. You need to produce the category certificate only to the admitting institute at the time of admission.

5. How do I make the fee payment for GATE 2011 examination?

You can make the payment during the ONLINE application process by choosing one of the following options:

* Payment Gateway: By using Credit or Debit cards or Netbanking through the payment Gateway of Bill Desk / HDFC / ICICI Bank.

* Challan Payment: Payment by cash at any branch of State Bank of India or Indian Bank.

6. If I choose the Payment Gateway option, how do I submit the ONLINE Application?

After completing the ONLINE application, choose Payment Gateway option and proceed. At the end of this process, a pdf file will be generated with the following pages:

* Page-1: Instructions for the candidate
* Page-2: GATE 2011 Application Form – GATE Copy
* Page-3: GATE 2011 Application Form – Candidate Copy
* Page-4: Address Slip

Take a print out of the entire file.

Paste your recent photograph (3 cm x 4 cm) in the designated place of Page-2.

Sign at the designated places of Page-2.

Paste Page-4 on top of a A4-size envelope

Duly filled-in Application Form (GATE Copy) with appropriate enclosures must be sent by Speed Post (preferably) or by Registered Post to The Chairman, GATE of the Zone, where the candidate prefers (corresponding to the 1st Choice of Examination City) to appear for the examination, so as to reach on or before Tuesday, November 02, 2010 or it can be handed over personally to respective Zonal GATE Office.

7. If I choose the Payment Gateway option, how do I submit the ONLINE Application?

After completing the ONLINE application process, a pdf file will be generated with the following pages:

* Page-1: Instructions for the candidate
* Page-2: GATE 2011 Application Form – GATE Copy
* Page-3: GATE 2011 Application Form – Candidate Copy
* Page-4: Address Slip
* Page-5: Bank Challan

Take a print out of the entire file.

The bank challan (Page-5) will be printed in triplicate. Take it to any branch of State Bank of India or Indian Bank (as opted by the candidate) and pay the fee. Bank will retain a copy with them and will return two copies to you. Retain the Candidate’s copy with you and attach the Institute’s Copy with the application form.

Paste your recent photograph (3 cm x 4 cm) in the designated place of Page-2.

Sign at the designated places of Page-2.

Paste Page-4 on top of an A4-size envelope

Duly filled-in Application Form with appropriate enclosures must be sent by Speed Post (preferably) or by Registered Post to The Chairman, GATE of the Zone, where the candidate prefers (corresponding to the 1st Choice of Examination City) to appear for the examination, so as to reach on or before Tuesday, November 02, 2010 or it can be handed over personally to respective Zonal GATE Office.

8. Do I need to post my application form and attachments?

Yes. As mentioned above in questions 6 and 7.

9. When and how will I know the status of my application?

The status of your application will be put up on the GATE website. Click on the link “Application Status” and follow the instructions. Generally, the status of your application will be put up within two days after the receipt of the application form in the GATE Zonal offices.

10. After completing the ONLINE application process and generating a pdf file, will I be able to login again to change my application data?

No. After completing all the steps upto pdf application form generation in ONLINE application process, you can only download the application form and cannot modify the data. However, you can create a new application by registering once again.

11. I have missed to take a print of my ONLINE application at the end of my application process. How will I get access to it?

You can login with the same Login id and password and take a printout.

Admit Card

1. When will I receive my admit card?

Your Admit card shall be sent to you by the zonal GATE office (the GATE office corresponding to your first choice of examination city) in January 2011 by regular postal mail. Candidates should contact the GATE Chairman of the zone concerned if they do not receive the admit card by January 20, 2011 for ONLINE examination papers (AE, GG, MN and TF), and by January 31, 2011 for OFFLINE examination papers (All papers other than AE, GG, MN and TF).

2. What should I do if I lost or did not receive my admit card sent by you?

In case you do not have a valid Admit Card for reasons beyond your control (e.g. delay in receipt, loss during transit by post, change of address etc.), take a print out of your registration number and centre details from GATE 2011 website and show it at the test center along with atleast one original (not photocopied / scanned copy) and valid (not expired) photo identification. Any of the following photo identification ONLY is permitted: Driver’s license, Passport, PAN Card, Voter ID, College ID, Employee identification card, or a notarized Affidavit, with Photo, Signature, Date of Birth and Residential Address. Photocopies of the original identification document are not acceptable. Candidates will not be permitted to take the test if original and valid photo identification is not presented.

GATE 2011 Examianation

1. For how many GATE papers can I apply?

A candidate can apply for only ONE of the 21 papers listed in the GATE INFORMATION BROCHURE or GATE website.

The choice of the appropriate paper is the responsibility of the candidate. Some guidelines in this respect are suggested below.

The candidate is expected to appear in a paper appropriate to the discipline of his/her qualifying degree. The candidate is, however, free to choose any paper according to his/her admission plan, keeping in mind the eligibility criteria of the institutions in which he/she wishes to seek admission

2. After submission of application, am I permitted to change my Test Paper or Examination City?

Requests for change of Test paper after the submission of Application Form will not be considered.

Requests for change of examination city will be accepted till December 31, 2010 with a fee of Rs.400/- to be paid in the form of demand draft (payment details) to the respective zonal GATE office.

3. If I notice a discrepancy between Test paper/Examination city in my application and the data available on the GATE website what should I do?

The choice of the Test paper and first choice of examination city of each candidate as per GATE records will be made available on the websites of GATE 2011 by December 10, 2010. The candidate should verify the same and if there is any discrepancy he/she should inform the corresponding zonal GATE Chairman by sending a signed letter or FAX so as to reach the zonal GATE office on or before December 31, 2010 so that it may be corrected. There is no need to pay any additional fee for correction of discrepancy.

4. Will I be provided with any white paper for rough work and calculations during the test?

The question paper itself contains some blank sheets on which you can do the rough work. Rough work cannot be done on any other paper/sheet as no additional paper will be provided during the test.

5. Am I allowed to leave the examination hall during the test?

No candidate will be allowed to leave the examination hall for any reason during the test. Candidates are allowed to leave the hall only after the Answer Sheets from all the candidates in the examination hall have been collected and accounted for.

6. What items are not permitted to be brought with me inside the examination venue?

Electronic diary, mobile phone, and any such electronic gadgets, blank papers, clip boards and log-tables will not be allowed in the examination venue. You should, however, bring HB black pencils (to darken the bubbles in the answer sheet), a soft eraser (in case you wish to change an answer) and a black point pen for filling up the candidate’s data in the designated boxes. Also, you can bring a scientific calculator without data connectivity.

7. Will there be any arrangement at the test center for the safe keeping of my personal items such as my mobile phone?

No such arrangements will be possible at the test center. If you bring any item that is not permissible inside the examination venue, you will have to keep it at the test centre at your own risk.

Click Here To CLICK HERE FOR MORE RESULTS JOB

Syllabus for Engineering Mathematics (XE: Section A)
(Compulsory Section) CLICK HERE FOR MORE RESULTS JOB

Linear Algebra:

Algebra of matrices, inverse, rank, system of linear equations, symmetric, skew-symmetric and orthogonal matrices. Hermitian, skew-Hermitian and unitary matrices. eigenvalues and eigenvectors, diagonalisation of matrices, Cayley-Hamilton Theorem.

Calculus:

Functions of single variable, limit, continuity and differentiability, Mean value theorems, Indeterminate forms and L’Hospital rule, Maxima and minima, Taylor’s series, Fundamental and mean value-theorems of integral calculus. Evaluation of definite and improper integrals, Beta and Gamma functions, Functions of two variables, limit, continuity, partial derivatives, Euler’s theorem for homogeneous functions, total derivatives, maxima and minima, Lagrange method of multipliers, double and triple integrals and their applications, sequence and series, tests for convergence, power series, Fourier Series, Half range sine and cosine series.

Complex variables:

Analytic functions, Cauchy-Riemann equations, Application in solving potential problems, Line integral, Cauchy’s integral theorem and integral formula (without proof), Taylor’s and Laurent’ series, Residue theorem (without proof) and its applications.

Vector Calculus:

Gradient, divergence and curl, vector identities, directional derivatives, line, surface and volume integrals, Stokes, Gauss and Green’s theorems (without proofs) applications.

Ordinary Differential Equations:

First order equation (linear and nonlinear), Second order linear differential equations with variable coefficients, Variation of parameters method, higher order linear differential equations with constant coefficients, Cauchy- Euler’s equations, power series solutions, Legendre polynomials and Bessel’s functions of the first kind and their properties.

Partial Differential Equations:

Separation of variables method, Laplace equation, solutions of one dimensional heat and wave equations.

Probability and Statistics:

Definitions of probability and simple theorems, conditional probability, Bayes Theorem, random variables, discrete and continuous distributions, Binomial, Poisson, and normal distributions, correlation and linear regression.

Numerical Methods:

Solution of a system of linear equations by L-U decomposition, Gauss-Jordan and Gauss-Seidel Methods, Newton’s interpolation formulae, Solution of a polynomial and a transcendental equation by Newton-Raphson method, numerical integration by trapezoidal rule, Simpson’s rule and Gaussian quadrature, numerical solutions of first order differential equation by Euler’s method and 4th order Runge-Kutta method.

Syllabus for Fluid Mechanics (XE: Section B)
(Optional Section)

Fluid Properties:

Relation between stress and strain rate for Newtonian fluids.

Hydrostatics:

Buoyancy, manometry, forces on submerged bodies.

Eulerian and Lagrangian description of fluid motion, concept of local and convective accelerations, steady and unsteady flows, control volume analysis for mass, momentum and energy.

Differential equations of mass and momentum (Euler equation), Bernoulli’s equation and its applications.

Concept of fluid rotation, vorticity, stream function and potential function.

Potential flow: elementary flow fields and principle of superposition, potential flow past a circular cylinder.

Dimensional analysis:

Concept of geometric, kinematic and dynamic similarity, importance of non-dimensional numbers.

Fully-developed pipe flow, laminar and turbulent flows, friction factor, Darcy-Weisbach relation.

Qualitative ideas of boundary layer and separation, streamlined and bluff bodies, drag and lift forces.

Basic ideas of flow measurement using venturimeter, pitot-static tube and orifice plate.

Syllabus for Materials Science (XE: Section C)
(Optional Section)

Structure:

Atomic structure and bonding in materials. Crystal structure of materials, crystal systems, unit cells and space lattices, determination of structures of simple crystals by x-ray diffraction, miller indices of planes and directions, packing geometry in metallic, ionic and covalent solids. Concept of amorphous, single and polycrystalline structures and their effect on properties of materials. Crystal growth techniques. Imperfections in crystalline solids and their role in influencing various properties.

Diffusion:

Fick’s laws and application of diffusion in sintering, doping of semiconductors and surface hardening of metals.

Metals and Alloys:

Solid solutions, solubility limit, phase rule, binary phase diagrams, intermediate phases, intermetallic compounds, iron-iron carbide phase diagram, heat treatment of steels, cold, hot working of metals, recovery, recrystallization and grain growth. Microstrcture, properties and applications of ferrous and non-ferrous alloys.

Ceramics:

Structure, properties, processing and applications of traditional and advanced ceramics.

Polymers:

Classification, polymerization, structure and properties, additives for polymer products, processing and applications.

Composites:

Properties and applications of various composites.

Advanced Materials and Tools:

Smart materials, exhibiting ferroelectric, piezoelectric, optoelectric, semiconducting behavior, lasers and optical fibers, photoconductivity and superconductivity, nanomaterials , synthesis, properties and applications, biomaterials, superalloys, shape memory alloys. Materials characterization techniques such as, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, scanning tunneling microscopy, atomic absorption spectroscopy, differential scanning calorimetry.

Mechanical Properties:

Stress-strain diagrams of metallic, ceramic and polymeric materials, modulus of elasticity, yield strength, tensile strength, toughness, elongation, plastic deformation, viscoelasticity, hardness, impact strength, creep, fatigue, ductile and brittle fracture.

Thermal Properties:

Heat capacity, thermal conductivity, thermal expansion of materials.

Electronic Properties:

Concept of energy band diagram for materials – conductors, semiconductors and insulators, electrical conductivity effect of temperature on conductility, intrinsic and extrinsic semiconductors, dielectric properties.

Optical Properties:

Reflection, refraction, absorption and transmission of electromagnetic radiation in solids.

Magnetic Properties:

Origin of magnetism in metallic and ceramic materials, paramagnetism, diamagnetism, antiferro magnetism, ferromagnetism, ferrimagnetism, magnetic hysterisis.

Environmental Degradation:

Corrosion and oxidation of materials, prevention.

Syllabus for Solid Mechanics (XE: Section D)

(Optional Section)

Equivalent force systems; free-body diagrams; equilibrium equations; analysis of determinate trusses and frames; friction; simple relative motion of particles; force as function of position, time and speed; force acting on a body in motion; laws of motion; law of conservation of energy; law of conservation of momentum.

Stresses and strains; principal stresses and strains; Mohr’s circle; generalized Hooke’s Law; thermal strain; theories of failure. Axial, shear and bending moment diagrams; axial, shear and bending stresses; deflection (for symmetric bending); torsion in circular shafts; thin cylinders; energy methods (Castigliano’s Theorems); Euler buckling.

Free vibration of single degree of freedom systems.

Syllabus for Thermodynamics (XE: Section E)
(Optional Section)

Basic Concepts:

Continuum, macroscopic approach, thermodynamic system (closed and open or control volume); thermodynamic properties and equilibrium; state of a system, state diagram, path and process; different modes of work; Zeroth law of thermodynamics; concept of temperature; heat.

First Law of Thermodynamics:

Energy, enthalpy, specific heats, first law applied to systems and control volumes, steady and unsteady flow analysis.

Second Law of Thermodynamics:

Kelvin-Planck and Clausius statements, reversible and irreversible processes, Carnot theorems, thermodynamic temperature scale, Clausius inequality and concept of entropy, principle of increase of entropy; availability and irreversibility.

Properties of Pure Substances:

Thermodynamic properties of pure substances in solid, liquid and vapor phases, P-V-T behaviour of simple compressible substances, phase rule, thermodynamic property tables and charts, ideal and real gases, equations of state, compressibility chart.

Thermodynamic Relations:

T-ds relations, Maxwell equations, Joule-Thomson coefficient, coefficient of volume expansion, adiabatic and isothermal compressibilities, Clapeyron equation.

Thermodynamic cycles:

Carnot vapor power cycle, Ideal Rankine cycle, Rankine Reheat cycle, Air standard Otto cycle, Air standard Diesel cycle, Air-standard Brayton cycle, Vapor-compression refrigeration cycle.

Ideal Gas Mixtures:CLICK HERE FOR MORE RESULTS JOB

Dalton’s and Amagat’s laws, calculations of properties, air-water vapor mixtures and simple thermodynamic processes involving them.

Syllabus for Polymer Science and Engineering
(XE: Section F)
(Optional Section)

Chemistry of high polymers:

Monomers, functionality, degree of polymerizations, classification of polymers, glass transition, melting transition, criteria for rubberiness, polymerization methods: addition and condensation; their kinetics, metallocene polymers and other newer techniques of polymerization, copolymerization, monomer reactivity ratios and its significance, kinetics, different copolymers, random, alternating, azeotropic copolymerization, block and graft copolymers, techniques for copolymerization-bulk, solution, suspension, emulsion.

Polymer Characterization:

Solubility and swelling, concept of average molecular weight, determination of number average, weight average, viscosity average and Z-average molecular weights, polymer crystallinity, analysis of polymers using IR, XRD, thermal (DSC, DMTA, TGA), microscopic (optical and electronic) techniques.

Synthesis and properties:

Commodity and general purpose thermoplastics: PE, PP, PS, PVC, Polyesters, Acrylic, PU polymers. Engineering Plastics: Nylon, PC, PBT, PSU, PPO, ABS, Fluoropolymers Thermosetting polymers: PF, MF, UF, Epoxy, Unsaturated polyester, Alkyds. Natural and synthetic rubbers: Recovery of NR hydrocarbon from latex, SBR, Nitrile, CR, CSM, EPDM, IIR, BR, Silicone, TPE.

Polymer blends and composites:

Difference between blends and composites, their significance, choice of polymers for blending, blend miscibility-miscible and immiscible blends, thermodynamics, phase morphology, polymer alloys, polymer eutectics, plastic-plastic, rubber-plastic and rubber-rubber blends, FRP, particulate, long and short fibre reinforced composites.

Polymer Technology:

Polymer compounding-need and significance, different compounding ingredients for rubber and plastics, crosslinking and vulcanization, vulcanization kinetics.

Polymer rheology:

Flow of Newtonian and non-Newtonian fluids, different flow equations, dependence of shear modulus on temperature, molecular/segmental deformations at different zones and transitions. Measurements of rheological parameters by capillary rotating, parallel plate, cone-plate rheometer. viscoelasticity-creep and stress relaxations, mechanical models, control of rheological characteristics through compounding, rubber curing in parallel plate viscometer, ODR and MDR.

Polymer processing:

Compression molding, transfer molding, injection molding, blow molding, reaction injection molding, extrusion, pultrusion, calendaring, rotational molding, thermoforming, rubber processing in two-roll mill, internal mixer.

Polymer testing:

Mechanical-static and dynamic tensile, flexural, compressive, abrasion, endurance, fatigue, hardness, tear, resilience, impact, toughness. Conductivity-thermal and electrical, dielectric constant, dissipation factor, power factor, electric resistance, surface resistivity, volume resistivity, swelling, ageing resistance, environmental stress cracking resistance.

Click Here CLICK HERE FOR MORE RESULTS JOB